Station push buttons are configured to replace some of the touch screen interaction when running Tascus sequences.
The following table lists the default configuration of the Push Buttons:
Input | Description | Function |
|---|---|---|
DI0 | Green | Start sequence / Complete step / Next / Pass |
DI1 | Red | Abort sequence / Cancel / Fail |
DI2 | Black | Back one step (when running a sequence) |
To enable this functionality, all you need to do is check Inputs Enabled, DI0 - DI2 will be automatically configured to perform the functions from the table above.
Physical wires for the push-buttons should be connected like this:
