Set Digital Output
You can configure multiple different Digital Outputs and use them within a sequence to turn them On and Off on a Work Station during Production.......
Set PSU
Set PSU (Power Supply Unit) allows you to set the voltage and current and whether a power supply is on or off on a particular......
Tighten
Add a Tighten step to the list, selecting the image to be used for the work instruction, and selecting the Torque Cycle (Pset on the......
Upload Document Overview
This step allows you to upload a document to the Tascus report directory for each unique serial number product. It supports uploading the following types......
Upload Document CSV
This article explains how to import a .csv text file and it's data into Tascus When the step runs, the operator will be prompted to......
Upload Document Other
You can import Other types of file (pdf, image)...
Vision System
This step supports camera for Vision System from SensoPart & Keyence Set up the Vision System step within the Sequence Editor, use the left hand......
Visual Inspection
A Visual Inspection provides the Operator with a product image and a Drop-Down-List of Failure Reasons, allowing them to highlight agrid-areato identify any faults or......
Wait
The Wait step can be used to add a delay or a timer into a production sequence. From the Sequence Editor, select Step Type >......
Weigh Scale Measure
Takes a weight reading from a connected Sauter or Kern scale, compares it against configurable high and low limits, and returns a pass/fail result to......
