Work Orders
I have more than one Work Order but it says it has been completed? This article will help you to configure the Settings to have......
My work instructions don't display
How to reconnect to work instruction folders If your work instructions are located on a shared network drive, sometimes the connection can be lost, meaning......
Failed to Save Results Error Message
There are two main causes of the Failed to Save Results error. To ensure Tascus is configured to the correct folder, follow the steps below:......
Error Message when trying to save an Image
Ensure you have configured a Project to a Sequence to avoid this error. Check the Media and Results Folder...
Unable to load a Part Number with a Routing
Create a Works Order and add a Routing. The images below shows an Order that has been added, and how the Routing should appear in......
How to stop default Fail options from appearing when using PM=Fail logic
Pm=Fail logic only works when running the sequence from completing a PM task. It does not work from Trial Run Sequence....
How to condition an Operation to only start when the pervious operation is complete
The Operation Start conditions can be configured from the Manufacturing Routings page on the Sequence Editor....
How can I change the batch quantity mid way?
To change the Batch from 2 to 3 Hydrations midway you can use the Production WIP Editor: (Tascus Home Menu bar> Reports> Production WIP Editor)...
Error Message during Capture Image step in Sequence
If an error message occurs when you are using a Capture Image step, follow these steps to try and resolve the issue....
I can’t see data on the Product Report from certain work stations?
If you are struggling to find data on the Product Report that has been conducted from a Production, check your Manufacturing Routings to ensure the......
Pre-Conditions Error Messages
If you have a Preconditions message arise that stops you from starting an Operation, take a look at the following examples with solutions to try......
How to open Completed orders?
Start by opening the Production Area Overview Locate the Load Orders Winow View the MO from the Start Production screen...
