Approval
This step displays a box at which an operator or supervisor must log in again to confirm that a process has been completed. At this......
Step Types Overview
Tascus production sequences are built using ‘Steps’. Each step type performs a different function from displaying work instructions to operators, to capturing shop floor data......
Calculation
The Calculation Step will perform a mathematical calculation using values. To configure this in the sequence editor, select measurements and click the edit icon for......
Capture Image
This step allows you to capture an image using a camera connected to the station computer. When the step runs, it will display a feed......
Counter
The Counter Step could be used to track a product through an operation without Work Instructions or Data Capture sequence steps....
Create Label
Enhance MES production by adding a "Create Label" step to your sequence. This example demonstrates two start options: "Work Order" and "Barcode Only," enabling tailored......
Deviation
You can show a notification to operators of a temporary change to the manufacturing process with the Deviation Step. When this runs in production it......
Display Work Instruction
Using the Display Work Instruction step will allow you to present media files to the operator during production. - Display Work Instruction Overview - Advanced......
Furness Leak Test
The Furness Leak Test connects to the FCO730 device: https://www.furness.com/product/fco730/ You must Configure and Diagnose the Furness Leak Test before use....
If-Or
The If-Or step can be used in combination with numeric measurements or calculations and preconditions to create custom rework logic. This simple example sequence shows......
Loop
The Loop step type can be used to repeat the same step multiple times to record and collect data. From the Sequence Editor, select Loop......
Manual Measure
This step enables an operator to enter a numeric value and have that recorded against test limits....
